FLEXIBLE WATERPROOF COATING
11 Apr 2019
Waterproof the floor and wall joints of permanent formwork with Drizoro Maxseal Flex, a flexible, durable coating from Scientific Waterproofing Products that adheres to almost any surface. Find out the benefits.
Drizoro Maxseal flex is the ideal solution for waterproofing floor and wall joints of permanent formwork. It also performs well as a bonding bridge on permanent formwork for installing cement and acrylic render, paint, tiles and rock or brick cladding.
Maxseal Flex is a coating with flexible and waterproofing properties that adheres to practically every surface, such as concrete, natural and artificial stone, mortar plasters, bricks, concrete blocks and more. It can be subjected to both positive or negative high-water pressure. It can be rendered or painted over.
Maxseal Flex is a two-component product: Component A is a mortar based on a mixture of special cements, additives and well-graded fillers and Component B is a liquid based on special synthetic resin.
Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating that adheres to those common substrates in construction such as concrete, natural and artificial stone, traditional mortar plasters, bricks, concrete blocks.
Maxseal Flex provides a fully-flexible coating that ensures complete waterproofing even in the most severe conditions, as high negative water pressure. It covers shrinkage and hairline cracks of the concrete and can act as an anti-fracture membrane between the substrate and other finishing coats if applied.
Maxseal Flex provides excellent protection for concrete, being both a CO2 an chlorine (Cl-) barrier and thereby preventing carbonation and electrochemical corrosion. It is permeable to water vapour, allows the substrate to breathe, is resistant to abrasion and UV rays and can withstand atmospheric pollution, corrosive effects of saltwater and de-icing salts and freeze/thaw cycles.
With excellent adhesion, Maxseal Flex is easy to use, and it does not require bonding agents and can be applied on wet surfaces. it lasts longer than other coatings is more environmentally friendly too.
Drizoro cement-based waterproofing products are non-toxic and suitable for all concrete surfaces, bricks, blocks, AAC panels and AAC blocks. They are ideal for repairing and sealing cementitious surfaces against water penetration and can be used as a protective coating for all cementitious construction surfaces.
All Drizoro products are guaranteed for 10 years.
With over 25 years of industry experience, Scientific Waterproofing Products (SWP) is well placed to recommend the right product for your waterproofing and repair needs. They can also recommend certified, experienced applicators.
Visit the SWP website to find out more.
